Pianos consistently make movers annual list of products that are most frequently damaged. Grand pianos are specifically problematic. Practicing the following procedures for disassembling, cushioning and filling grand pianos will avoid damage, lower claims expense, and improve customer satisfaction.
1) At least three people are needed to deal with a child grand piano. If the child grand piano requires to increase or down stairs or if a complete or show grand piano needs to be transported, a minimum of 4 individuals are required.
2) Constantly finish a extensive and precise stock. It may be more effective or necessary to utilize a visual inventory to properly explain and show pre-existing damage.
3) As different parts are disassembled, please place all hardware in an appropriately labeled parts bag and then position the parts bag in a "Components Box".
4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furniture pad.
5) Disconnect the cover by getting rid of the hinge pins. Have one person wiggle the lid, holding it opposite the hinge, while a 2nd person works the pin loose. Please be mindful not to damage the wood with the pliers or with the pin itself. If needed, cover the jaws of the pliers with a small fabric to help avoid damage to the wood. Wrap the cover in a clean furnishings pad.
6) Remove the prop that holds the lid open and cover it in a tidy furnishings pad. The prop has a hinge pin and is in two pieces.
7) Get rid of the pedal assembly and wrap it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please be careful not to drop the braces. In addition, please be particularly mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the proper number on each rod. Note: If masking tape is unavailable, please use properly identified parts bags for this function. When reassembling at location, please make certain to put the rods in the right order so that the pedals will work properly.
8) Pad the piano by putting a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you manage the piano. Cover the top of the piano with 2 tidy furniture pads, neatly folded around the keyboard. Usage elastic band to protect the pads. Keep in mind: Please guarantee that the surface of the piano is dust-free prior to padding it. Padding an extremely refined surface that see this is dirty might trigger fine scratches, especially on a black lacquer finish.
9) Position a piano board and connect the straps so that it is prepared to receive the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Eliminate the left front leg by placing one individual beneath the piano at the left end of the keyboard. Be sure to have 2 individuals raising the corner of the piano while the 3rd individual gets rid of the leg. Keep in mind: Please be sure to keep in mind which legs were removed from which positions considering that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please make certain to raise the whole piano somewhat while completing this maneuver to avoid excessive pressure on the staying, attached legs as the piano suggestions. Lift the piano to an upright position on the board. Note: Please make sure that the soundboard is safe and secure prior to raising. Make certain that the piano is focused snugly against the brace at the end of the piano board. Keep in mind: Never leave the piano unattended. Constantly have at least a single person holding the piano steady more info at all times.
12) Get rid of the two staying legs and cover them in clean furnishings pads. These legs are held in location by a "key and slot" arrangement. To get rid of the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and attaching them. Place folded burlap pads over the furnishings pads however under the straps to provide extra protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for security against residence damage, put the keyboard end of the piano towards the bottom of the stairs. Attach a hump strap to the top end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to fill the cushioned cover is in between the piano and the preceding tier or in between the wall and the piano.
Grand pianos represent a considerable difficulty, they can be moved without damage by using common sense and practicing the procedures listed above.